A amazing range of oil-based Stain & Varnish in one can. Unlike other oil based varnishes “Only Greens” formula washes up in water
- Satin Finish
- Made in NZ
- eco friendly
- oil based but washes up in water
- for interior surfaces
- safe for toys and Childrens rooms
2-in-1 Varnish and Stain is a unique oil based polyurethane finish that washes up in water. It dries harder than oil based varnishes and doesn’t yellow. 2-in-1 varnish & stain is a 3 coat system. 1st Coat acts as a stain & Sealer. 2nd coat will seal and colour. 3rd coat applies varnish
finish.2-in-1 is an interior clear finish and is ideal for all timbers but works best on pine, particle board & MDF.
Despite being oil based it is quick drying and is low odour and being an eco formula it is less harmful to our environment than other paint finishes. 2-in-1 Varnish and Stain Can be used for trims, windows, doors, benchtops, bars, furniture & floors. It is scratch resistant, excellent adhesion and is self leveling. It can be re-coated the same day.
DIRECTIONS: Surface preparation. The surface must be clean free of loose paint, grease and other contaminants. If surface has flaking paint, scrape off loose material & sand.
As 2-in-1 is a transparent coating it will “show through” any previous finishes, make sure previous finishes are either removed or sanded so the finish is even.
For new timber sand first with 150-180g sand paper this will allow for maximum penetration. In between coats sand with 320g sand paper. If lighter finish is required use “Clearcoat” as a substitute for the third coat. Gloss Clear coat is available if Gloss is required
Important Note: Colours on colour chart are only an indication of actual colours 4Ltrs and 10ltrs of “2 in 1" are available with a short lead time
