Eco Stain & Varnish in one NZ wood colours 500ml

Regular price $31.50

Tax included. Shipping calculated at checkout.

A amazing range of oil-based Stain & Varnish in one can.  Unlike other oil based varnishes “Only Greens” formula  washes up in water

  • Satin Finish
  • Made in NZ
  • eco friendly
  • oil based but washes up in water
  • for interior surfaces
  • safe for toys and Childrens rooms

2-in-1 Varnish and Stain is a unique oil based polyurethane finish that  washes up in water. It  dries harder than oil based varnishes and  doesn’t yellow. 2-in-1 varnish & stain is a 3 coat  system. 1st Coat acts  as a stain & Sealer. 2nd coat will seal and colour. 3rd coat applies varnish
finish.2-in-1 is an interior clear finish and is ideal for all timbers but works  best on pine, particle  board & MDF.

Despite being oil based it is quick  drying and is low odour and being an eco formula it is  less harmful to  our environment than other  paint finishes. 2-in-1 Varnish and Stain  Can be used for trims, windows, doors, benchtops, bars, furniture &  floors. It is scratch resistant, excellent adhesion and is self leveling. It  can be re-coated the same day.

DIRECTIONS: Surface preparation. The surface must be clean free of  loose paint, grease and  other contaminants. If surface has flaking paint,  scrape off loose material & sand.
As 2-in-1 is a transparent coating it will “show through” any previous  finishes, make sure previous finishes are either removed or sanded  so the finish is even.
For new timber sand first with 150-180g sand paper this will allow for  maximum penetration. In between coats sand with 320g sand paper. If lighter finish is required use “Clearcoat” as a substitute for the third  coat. Gloss Clear coat is available if Gloss is required

Important Note: Colours on colour chart are only  an indication of actual colours 4Ltrs and 10ltrs of “2 in 1" are  available with a short lead time